GEOFENCE

Collaboration diagram for GEOFENCE:

Modules
	IOCTL commands
	Defines

Macros
#define	CXD56_GEOFENCE_IOCTL_START   1
#define	CXD56_GEOFENCE_IOCTL_STOP   2
#define	CXD56_GEOFENCE_IOCTL_ADD   3
#define	CXD56_GEOFENCE_IOCTL_MODIFY   4
#define	CXD56_GEOFENCE_IOCTL_DELETE   5
#define	CXD56_GEOFENCE_IOCTL_ALL_DELETE   6
#define	CXD56_GEOFENCE_IOCTL_GET_REGION_DATA   7
#define	CXD56_GEOFENCE_IOCTL_GET_USED_ID   8
#define	CXD56_GEOFENCE_IOCTL_GET_ALL_STATUS   9
#define	CXD56_GEOFENCE_IOCTL_SET_MODE   10
#define	CXD56_GEOFENCE_IOCTL_INVAL   0
#define	CXD56_GEOFENCE_IOCTL_MAX   11

Detailed Description

Macro Definition Documentation

CXD56_GEOFENCE_IOCTL_START

#define CXD56_GEOFENCE_IOCTL_START   1

Start geofence monitoring.
This command is used to start the geofence monitoring.

Parameters

arg	Parameter is Unnecessary. Set Zero.

CXD56_GEOFENCE_IOCTL_STOP

#define CXD56_GEOFENCE_IOCTL_STOP   2

Stop geofence monitoring.
This command is used to stop the geofence monitoring.

Parameters

arg	Parameter is Unnecessary. Set Zero.

CXD56_GEOFENCE_IOCTL_ADD

#define CXD56_GEOFENCE_IOCTL_ADD   3

Add region. This command is used to add the region.

Parameters

arg	Parameter is struct cxd56_geofence_region_s.

CXD56_GEOFENCE_IOCTL_MODIFY

#define CXD56_GEOFENCE_IOCTL_MODIFY   4

Modify region. This command is used to modify the region.

Parameters

arg	Parameter is struct cxd56_geofence_region_s.

CXD56_GEOFENCE_IOCTL_DELETE

#define CXD56_GEOFENCE_IOCTL_DELETE   5

Delete region. This command is used to delete the region.

Parameters

arg	Parameter is region id.

CXD56_GEOFENCE_IOCTL_ALL_DELETE

#define CXD56_GEOFENCE_IOCTL_ALL_DELETE   6

Delete all region. This command is used to delete all region.

Parameters

arg	Parameter is Unnecessary. Set Zero.

CXD56_GEOFENCE_IOCTL_GET_REGION_DATA

#define CXD56_GEOFENCE_IOCTL_GET_REGION_DATA   7

Get region data. This command is used to get region data.

Parameters

arg	Parameter is struct cxd56_geofence_region_s pointer Latitude and longitude and radius data of specified id is stored.

CXD56_GEOFENCE_IOCTL_GET_USED_ID

#define CXD56_GEOFENCE_IOCTL_GET_USED_ID   8

Get used id. This command is used to get used region id.

Parameters

arg	Parameter is uint32_t data pointer. The used id is represented by bit field. For example, when ID0 and ID19 are used, since bit0 and bit19 are set, the return value is 0x00080001.

CXD56_GEOFENCE_IOCTL_GET_ALL_STATUS

#define CXD56_GEOFENCE_IOCTL_GET_ALL_STATUS   9

Get all status. This command is used to get all region status.

Parameters

arg	Parameter is Unnecessary. Set Zero. All region status will stored in next read data.

CXD56_GEOFENCE_IOCTL_SET_MODE

#define CXD56_GEOFENCE_IOCTL_SET_MODE   10

Set goefence operation mode.
This command is used to set operation mode.

Parameters

arg	Parameter is struct cxd56_geofence_mode_s.